Processing Unit (UE16) for management of up to 16 circuit breakers/disconnectors and 16 fault detectors. Expanded version of the UE8 system.

It supplies power to system peripherals and receives digital and analog signals from the field. The unit performs system automatisms related to IMS switches. Measurements and commands are recorded chronologically.

The unit precisely verifies and executes received commands and/or sends status information to the central control unit. The IMS command is executed after the 1/N check and the applied load impedance check, using a dual relay contact system.

The cybersecurity firmware section and tamper switch ensure a comprehensive degree of protection.

remote control and configuration are possible through the interface and communication ports on the front.